Vape technique and smoke technique 101

Novices in the field of e-cigarettes will undoubtedly encounter some "e-cigarette terms" from suppliers and advanced users. To avoid being excluded, VapingDaily.com has compiled a glossary of e-cigarette terms to let you know all the terms that are thrown out.

20700-The battery type usually used with advanced box modules and some mechanical modules. This symbol is derived from size: 20 mm in diameter and 70 mm in length. These batteries provide greater storage capacity and amperage than the traditional 18650.

26650-The largest battery used in premium e-cigarettes and PV. These are usually used for sub-ohm vapers or users who use atomizers with a resistance of less than 1 ohm.

306-A disposable atomizer that uses the same thread as the 510 atomizer. 306 atomizers usually have low resistance, and 510 users often use these types of atomizers to increase steam production.

401, 402 and 403-also known as m401, m402 and m403, these types of e-cigarettes are almost the same except for the battery length. 401s is the longest and 403s is the shortest.

510-The most common and popular atomizer style. Its thread has become the industry standard for most atomizers, atomizers, atomizers and tanks.

808-Also known as KR808, it is one of many types of electronic cigarettes.

901-Nebulizers with internal threads. These nebulizers cannot be used with PVs that use 510 threads unless an adapter is used.

16340-The smallest battery used for high-end cigarettes, usually used in series or parallel.

18350-The battery of choice for advanced users because of its small size and is usually used for invisible modules.

18500-A larger size than 18350s, 18500s provide longer battery life, although they are not as popular as 18350s, because many users think that the increase in size is not worth a slight increase in mAh.

18650-The most popular and best e-cigarette battery size. These batteries provide users with good power and battery life, and are smaller than 26650.

Advanced Personal Vaporizer (APV)-Also known as mods (or improved electronic cigarettes), these devices are larger, have replaceable batteries, and can be mechanical, variable voltage, or variable wattage.

AEMSA-on behalf of the American Electronic Cigarette Manufacturing Standards Association. It is a non-profit organization. Their mission is to establish safe and appropriate standards for e-liquid manufacturing.

AFC-Airflow control. This refers to a small dial (sometimes a screw) found in the atomizer and atomizer/canister, used to adjust the resistance of the e-cigarette.

Airflow-the amount of air drawn into the atomizer or canister. A looser airflow will produce more steam, while a tighter airflow will result in less steam but a stronger taste.

Special-shaped coil-an improved version of Clapton coil, with one wire wound on three core wires.

All Day Vape – A term used to refer to the type of e-cigarette you prefer more than others, that is, "This strawberry tobacco tastes great, it can be my all-day vape!"

Allen wrench or wrench-a small tool, usually used to adjust the Allen screw in a rebuildable atomizer or fuel tank.

American Wire Gauge-also abbreviated as AWG, this is the American wire size standard used to determine the resistance of the coil during reconstruction-the thicker the wire, the lower the resistance.

Ampere-short for amperage, which is the flow of energy along a circuit. A battery with a higher amperage can better handle a lower resistance atomizer without overheating.

Anodizing-The process of forming a durable non-oxidizing coating on the surface of aluminum.

Simulation-the slang name for ordinary cigarettes.

Aqueous glycerin (AG)-VG liquid diluted with the help of deionized water to reduce its viscosity.

Atomizer-also referred to as "atty", this is a part of an e-cigarette, equipped with a coil and a wick, which can generate vapor from the e-liquid after heating.

Auto-an e-cigarette mode in which the battery automatically heats the atomizer without the user having to press a button. This is activated by a sensor in the nebulizer, which detects when the user inhales air from it.

Automatic shutdown-a safety feature in most regulated e-cigarettes that prevents the battery from overheating. If the electronic cigarette detects overheating, the device will automatically shut down.

1.) The main part of e-cigarettes. The term usually refers to e-cigarette pens and cigarettes without replaceable batteries. The two types are manual and automatic. The automatic battery is activated by inhalation, while the manual battery requires the user to press a button on the side.

2.) For users of PV and modules, this refers to the lithium-ion battery used to power their equipment.

BCC-bottom coil cleaner. The heating element is located at the bottom of the electronic cigarette can.

BDC-bottom double coil Clearomizer. There are two coils at the bottom of the water tank.

Blank-Atomizer or cartridge that does not contain e-liquid inside. Designed to refill the user's e-juice.

Boost-a special function in the adjustable box module that can increase power immediately.

Vape Mod-APV shaped like a box, they have mechanical or variable configurations. Some box modules can hold up to four 18650 batteries. Usually wider, some users prefer these over tube modules because of their shorter length (and therefore more portable). Box mods are also more powerful than their tubes, with power output ranging from 20 watts to 200 watts.

Bottom Vertical Coil Clearomiser (BVC)-The coil adopts a vertical configuration to improve airflow.

Bridge-This is the part of the disposable atomizer that contains the e-liquid, usually coated with steel mesh.

BT-short for large tobacco company.

Buck-a function that allows immediate ignition below the applied voltage on the regulated vape device.

Car adapter-an electronic cigarette charging device connected to a car lighter.

Carcinogen-a compound that occurs during the burning of tobacco or extreme e-cigarette liquid heating. Studies have shown that regular inhalation of carcinogens may cause cancer and other diseases.

Cartridge – a small mouthpiece equipped with Poly-Fil, used to hold e-liquid, it is connected to the atomizer, usually pre-filled.

Atomizer-The atomizer and the cartridge are combined into one. The atomizer is longer than ordinary atomizers, contains more e-liquid and is disposable. These are also available as stamping parts (for tanks) and double coils.

CASAA-Consumer Advocacy Association for Smokeless Alternatives. It is a non-profit organization advocating the rights of e-cigarette users.

Cig-A-Like-a simple electronic cigarette device, which is completely similar in appearance to traditional cigarettes.

Charger – A battery charger for e-cigarettes or separate batteries used with box modules and mechanical modules.

Clapton Coil-an advanced coil construction for rebuildable atomizers. It looks like a guitar string with a wide gauge wire wrapped around the core wire.

Cloud-A term describing the generation of steam, that is, "My current e-cigarette device can generate a lot of clouds!"

Coil-part of an atomizer that is used to heat or evaporate e-liquid.

Coil fixture-a thin metal tool for coil reconstruction.

Coil Winder-A stainless steel tool for manually winding coils.

Tapered thread-an eGo type threaded connection.

Connection-A term used to describe the type of thread used in an e-cigarette atomizer.

Custom modules-APV or PV not manufactured by the factory. Usually handmade, these are usually assembled using the most common household items.

Cut-off-a safety function in e-cigarettes. Cut-off refers to the amount of time that people can inhale a drop from the e-cigarette before the power is cut off to prevent overheating. The cut-off time for regulated e-cigarettes is usually between 10 and 15 seconds.

DCT-stands for dual-coil fuel tank. This is a fuel tank or atomizer that uses a perforated atomizer. The e-liquid capacity ranges from 3 ml to 6 ml.

Deck-part of the atomizer, in which positive and negative columns are found. This term is often used to describe rebuildable atomizers, and larger decks are easier to rebuild.

Dewick-Remove the wick from the atomizer.

Diacetyl-Diacetyl is a flavoring agent used in the production of some e-liquid, with a buttery taste. Inhalation of large amounts can cause bronchiolitis obliterans (also called popcorn lung). Many e-liquid suppliers have stopped using it.

E-cigarettes-another way of saying e-cigarettes

Disposable e-cigarettes-non-rechargeable e-cigarettes, users should throw them away after death.

DIY-do it yourself. This usually refers to homemade e-juice.

DNA – A chip made by Evolv. This is a variable power board. Its name is usually used to describe any module with an Evolv chip.

Dragon Coil-Usually a construction on a rebuildable atomizer, when the wick is wound on the coil. Increase cloud production with sufficient airflow.

Suction-A term describing the act of inhaling steam from the mouthpiece to the mouth.

Dripping-Refill the atomizer by dropping the e-liquid directly onto the coil of the atomizer.

Drip Shield-the name of the outer cover, used to slide onto the atomizer to capture the leaked electronic juice and return it to the atomizer. This prevents the e-liquid from spilling onto your e-cigarette.

Dripper-an accessory used to replace the stock mouthpiece of an atomizer with a large hole in order to drip without disassembling.

Drip Well-a term describing the bowl shape near the electronic cigarette connector. It is designed to capture leaked e-juice to prevent spillage.

Dry burning-This refers to igniting the atomizer without any smoke oil until the coil emits a red light to burn off the dry smoke residue.

Dry Hit-a term that describes the extraction of e-cigarette juice from e-cigarettes.

Dual Coil-A nebulizer, nebulizer, or nebulizer with two coils instead of one. This will release more steam at the cost of reducing battery life.

eGo-one of the more popular e-cigarette models, slightly larger than standard e-cigarette pens, with eGo thread, 510 thread or both (via adapter).

eGo Thread – The standard thread on the bottom of the eGo battery and eGo atomizer.

E-Juice (E-Liquid)-a solution to vaporize to produce steam, e-juice has a variety of nicotine concentrations and flavors. It is made of propylene glycol (PG), vegetable glycerin (VG), flavoring agent and nicotine (some of them do not contain nicotine).

Electronic Cigar-A disposable or rechargeable electronic cigarette that mimics the look and feel of traditional Cuban cigars.

E-cigarette-This name is used to describe a device that provides smokers with an alternative way to satisfy their cravings for nicotine. At its most basic, it consists of a battery and an atomizer, with electronic juice added to generate steam from it.

Electronic Cigarette Association (ECA)-An industry organization composed of suppliers and manufacturers that unite resources to promote e-cigarettes as a legal choice for smokers in the United States.

E-cigarette starter kit-a kit that usually consists of a battery unit and an atomizer, so users purchase all the necessary equipment to start smoking e-cigarettes in a box.

E-Hookah-an electronic accessory for real hookahs, which can evaporate e-liquid.

E-NIC (Electronic Nicotine Inhaler)-Another name for electronic cigarettes.

E-Smoke-Another name for the steam produced by electronic cigarettes.

Filler material-also known as "filler" or "Poly-Fil", this is a water-absorbing material used inside the cartridge and atomizer to hold the electronic juice, and then transport it to the atomizer for heating.

Flooding-This happens when the atomizer is too full. The submerged atty is characterized by reduced steam production, accompanied by grunting noises.

FDA-the executive branch of the US government responsible for formulating rules and regulations concerning the safety of all food and drugs sold in the country.

Forum-The Internet community board from which most e-cigarette users collect information, news, and announcements.

Formaldehyde-a carcinogen that occurs when e-cigarettes or cigarettes are used at extreme temperatures. Frequent inhalation of this chemical substance may be harmful to human health.

Fused Clapton-Clapton coil with two or more core wires.

Genesis Atomizer-an atomizer or tank that uses steel mesh instead of silica or cotton. The coil is located on the top of the tank and transports the juice through osmosis.

Glassomizer-a transparent atomizer with a glass container instead of a plastic container.

Gooseneck-the elongated mouthpiece of the atomizer, similar to the neck of a goose. The color, shape and material of the custom gooseneck are different.

GRAS (Generally Recognized as Safe)-A term used by the FDA to indicate that a product is considered safe.

Flat head screw-a nebulizer column clamp with a slightly pointed tip.

Heat sink-a fin or layer that protrudes from an atomizer, dripper, or e-cigarette. The heat sink is designed to dissipate heat faster.

High resistance-Atomizer with high ohmic reading for high pressure atomization.

Hot spot-a coil with luminous dots, indicating that the coil is wound unevenly. This usually results in a dry hit.

HV (High Voltage)-means an electronic cigarette device that works above 3.7 volts. Generally, due to potential battery failure, these atomizers and modules are not suitable for standard low-power batteries.

Hybrid-The connector type on the top of the mechanical module, with 510 thread and a hole in the middle. Using the hybrid top cover, the atomizer directly emits the positive contact of the battery. Not suitable for sub-ohm fuel tanks with negative pins. Also known as hybrid or hybrid power modules, these are electronic cigarettes with battery holders and atomizers, designed as a whole, with a stylish and seamless appearance.

ICR-Lithium Ion Cobalt Rechargeable Battery

IMR-Lithium ion manganese rechargeable battery

Inhalation-the act of inhaling vapor into the lungs or mouth. There are two types: lung inhalation and mouth-to-lung inhalation. Lung inhalation means that the vapor enters the lungs directly. This is usually used by cloud chasers and high-power users. Mouth-to-lung inhalation refers to the inhalation of vapor into the mouth and then into the lungs. This type is the most common and is the same as the inhalation method used by smokers.

Juice-shorthand term for e-liquid.

Kanthal Wire-This brand name usually refers to FeCrAl alloy wire used in high-power equipment. The temperature change of this alloy is very small, which is why it is not intended to be used as the outer layer of the coil in the TC mode.

Kick-A.) A term used to describe a throat hit.

B.) A chip manufactured by Evolv that can be inserted into a mechanical PV to convert it into a variable voltage/wattage device.

Leakage-When the e-cigarette liquid leaks from the atomizer/can/atomizer, etc. If the e-cigarette liquid starts to leak into the battery, this may damage the e-cigarette.

LED-stands for "Light Emitting Diode". This is a lamp similar to the end of a cigarette, which is used to simulate the luminescence of a traditional cigarette. When the battery needs to be charged, it also doubles as a warning light.

Liquid-Another shorthand term for e-liquid.

Li-Po-Lithium polymer rechargeable battery.

Lithium-ion battery (Li-Ion)-High-quality rechargeable batteries with various shapes, sizes and capacities.

LR (low resistance)-low ohmic atomizer/atomizer/atomizer. Generally, these coils consist of 1.5 ohm or lower coils. Lower resistance will produce more steam at the expense of reduced battery life.

mA-1/1000 of an ampere. This symbol usually describes the output of the charger.

mAh-Abbreviation for milliampere hour, this term is used to describe the ability of a battery to store energy. The higher the mAh, the longer the life before charging is required.

Manual-a type of electronic cigarette that requires a button to be pressed before steam is produced.

Manual shutdown-allows users to manually shut down the device by clicking a button combination to prevent rapid battery discharge and fire.

Mechanical modules-also known as mechanical modules, mechanical PVs or machines, these are e-cigarette models without any wires or adjustment chips. It is usually made of a metal tube with a manual switch. The circuit can be completed by pressing the switch. The mechanical module can also take the shape of a box, or modify a battery box, a mint box, etc.

Microcomputer/Microprocessor-a tiny microchip that contacts the battery to power the atomizer, allowing for customization of the experience.

MG Strength-Displays the nicotine content (in milligrams) in one milliliter of e-liquid. For example, written as mg/mL (milligrams per milliliter (mL)), "3mg e-cigarette" contains 3 mg of nicotine per 1 milliliter of e-cigarette.

Micro coil-a coil with tightly wound coils and a short radius, so that all the loops of the coil are in contact. Miniature coils usually require more windings than traditional coils to provide similar resistance (in ohms).

mg-represents the milligram strength per milliliter. This is used to determine the nicotine strength of the e-liquid. For example, "6mg" means 6 milligrams of nicotine per milliliter, or 0.8%.

Mini-A term used to describe a smaller, more concealed version of the standard e-cigarette model.

Mod-the abbreviation for "modification", e-cigarette modules usually use larger batteries, at the expense of size and portability, to provide users with longer battery life and stronger steam generation. Mods are designed to allow users to experience the best performance of their devices. Mods are available in mechanical or variable versions.

Mouthpiece-the end where the user inhales vapor. This can be built-in or customized using a drip irrigation head.

Mouth-to-Lung Hit-also known as "French inhalation", this is the traditional way smokers inhale smoke. For e-cigarette users, the vapor is inhaled into the mouth and then into the lungs. Although it provides less steam than a direct lung inhaler, this method provides more flavor.

MV (Multi-Voltage)-MV is a regulated vape module, implying various preset voltage settings that the user can select.

Nichrome Wire-Nichrome wire used in some atomizer coils. May contain some iron. A common ratio is 80% nickel and 20% chromium. Nichrome is suitable for high-power devices, TC mode and peculiar coil construction.

Nic Juice-an electronic juice containing nicotine.

Nicotine-also known as "nicotine", this is a substance found in cigarettes and some e-liquids that provide smokers and vapors with the so-called "high nicotine". Nicotine itself is as harmless as caffeine, and both are vasoconstrictors. The nicotine content of e-liquid varies from 0% to 5.2%.

Nicotine level-the concentration of nicotine in the e-liquid, in mg/mL.

NiMH-Nickel Metal Hydride-A battery that does not contain cadmium and has no memory effect, which is why it can be charged at any given time without affecting the safety of the battery.

NRT-stands for Nicotine Replacement Therapy.

Noob-a term used to describe beginners, it is an abbreviation for "novice". However, since the use of e-cigarettes is not difficult to learn, most users are only considered rookies for about a week.

Ohm-the unit of measurement used for resistance. A lower ohm reading of the coil means hotter and thicker steam, while a higher ohm reading means colder steam.

Organic cotton – an increasingly popular wick for rebuildable atomizers and water tanks. Organic cotton burns faster than silica, but provides a cleaner, richer taste.

Parallel connection – When modules that can use two batteries are connected in parallel, this increases battery life, effectively doubling the mAh. The voltage and voltage drop remain unchanged.

Pass-through-When the e-cigarette model is described as having pass-through function, it means that the device can be used while charging, connected to a cable. It can also refer to a pass-through model without a battery, but to supply power by plugging a USB cable into an adapter, computer, or mobile power supply.

PCC-stands for personal (or portable) charging case. PCC provides storage and charging boxes for electronic cigarettes (usually cigarette-like). The PCC has an internal battery that can be charged from an external power source.

Pen Style-An e-cigarette shaped like a pen. These are usually the kind in the starter kit.

Personal Vaporizer-also referred to as PV, this is another name for electronic cigarettes, especially suitable for retrofits and non-traditional cigarette-like devices.

Propylene Glycol (PG)-one of the two basic substances used in e-liquid. PG is an over-the-counter substance used in many foods.

Poly-Fil-another name for fillers found in cartridges and atomizers.

Primer-Also called "primer fluid", this is a VG-based solution that is applied to the coil and wick of the atomizer to prevent drying out during transportation and storage.

Protected battery-a battery with a built-in chip, once the voltage is too high or too low, the circuit will be disconnected to ensure safety.

Start-up-Before using the new atomizer, add a few drops of liquid, and then let it sit for a few minutes to allow the electronic juice to completely soak the wick. The same applies to newly filled cans, atomizers and atomizers.

PV (Personal Vaporizer)-another way of saying e-cigarette devices.

Suction-Perform a short suction action on the mouthpiece of the e-cigarette to inhale the vapor into the user's mouth.

Rebuildables-This can refer to tanks or atomizers, allowing users to rebuild their own coils and wicks. Mainly used by advanced users, rebuildable products allow vapers to adjust resistance, change different wicks, and try various settings to achieve their favorite vapes.

RDA-short for "Rebuildable Dripping Atomizer"

Resistance-Measured in ohms, the resistance depends on the thickness of the wire used in the coil, the number of coils, the circumference of the coil, and the thickness of the coil winding.

Resistance wire-a special type of metal wire used to evaporate the coil (heating element) of the electronic cigarette. The resistance level affects the amount of steam and flavor.

Ribbon Kanthal, Ribbon Wire, Ribbon-a type of resistance wire used to build coils. It has a flat cross section instead of a round shape and provides more surface area to conduct heat into the e-liquid. Users of the strip wire claim that it provides better steam and flavor production than traditional round resistance wires.

RBA-short for "rebuildable atomizer"

RTA-short for "Rebuildable Tank Atomizer"

RSST-Rebuildable stainless steel water tank

Sensors-electronic components used in advanced e-cigarette batteries can detect when the user smokes, and automatically power the atomizer, eliminating the need to press a button.

Series-For mechanical modules with a dual battery configuration connected in series, this effectively doubles the voltage output, but at the expense of battery life.

Silica-the most commonly used wick material, they have a high melting point and can be burned or dry burned to remove the dry residue in the e-juice.

Smart chip-a chipset located in the battery unit of the e-cigarette, which provides advanced functions and customizable settings.

Tobacco juice-another term for e-liquid.

Smokeless Cigarette-A term used to describe e-cigarettes produced due to insufficient smoke produced by e-cigarettes.

Stacking-Compared with the power that a single battery can provide, the dangerous practice of stacking batteries end-to-end in a mechanical model to amplify the power.

Standard resistance-is a typical range of ohms suitable for the function of e-cigarette devices, usually 1.8 to 3.0 ohms.

Starter kit-a package provided by most suppliers that usually contains everything you need to start smoking e-cigarettes, including: one or two e-cigarettes, one or two atomizers/nebulizers, a charger and/or A pack of pre-loaded cartridges.

Soaking – A term used by DIY e-juice manufacturers to describe the act of letting the newly mixed e-juice sit in the air for at least 6 hours to allow the ingredients to settle.

Stick Style-another term for e-cigarettes that looks like traditional.

Sub-ohming-The practice of experienced e-cigarette users by building coils with an ohm reading below 1.0 ohm to generate a large amount of vapor cloud.

Sweet Spot-Achievement achieved after patching to get the perfect vape. From getting the correct resistance, the correct e-cigarette, and the correct nicotine level, to the correct wattage or voltage, to using the correct PV or e-cigarette for your purpose.

Tail pipe-drip and inhale directly without dripper.

Tank-Clearomizers have a larger capacity glass or plastic case, which can hold more e-liquid. They can be equipped with perforated atomizers, prefabricated coils or rebuildable decks.

Thermal runaway-Lithium battery is overheated. It is usually caused by overcharging, short circuits, battery stacking, physical damage, wiring errors, and other electrical failures.

Throat Impact-The sensation of steam hitting the throat. Many vapers seem to mimic the piercing throat impact of a cigarette, while some people prefer a smoother throat impact.

Tobacco Harm Reduction (THR)-An action aimed at providing less harmful nicotine-containing products as an alternative to burning cigarettes.

Dudu-a slang term for smoking from electronic cigarettes.

Top hat-in other words, the top cover of the battery pack with the nebulizer accessory connector.

Fill up-Add a few drops of e-cigarette liquid to the ink cartridge, atomizer or can to fill it up.

Triple coil-seen in atomizers and rebuildable products, the triple coil generates a lot of steam but shortens battery life due to increased power consumption.

Tube Mod-A term used to describe e-cigarettes or PVs that are tube-shaped, about the same size as a small flashlight.

Unprotected battery-an unprotected battery. Some are made of safe chemical materials that do not react violently, while others may leak if improperly used or improperly charged.

USB charger-a charger that plugs into a USB port and gets power from that port. It can refer to a cable that plugs directly into an e-cigarette, or it can refer to a separate device used to charge the battery.

USB Passthrough-A feature of e-cigarette devices that allows e-cigarettes to be used when charging via a USB cable.

Vaper-a term used to describe anyone who uses e-cigarettes.

Vape Safe (fuse)-a coin-sized disc-shaped fuse used in mechanical modules. Advanced vapers use it to increase the safety against short circuits.

Vaper's Tongue-When the user uses too much of a flavor, it will produce a sensation, causing the tongue to become insensitive. It can also refer to the itching sensation on the tongue after prolonged use of e-cigarettes.

Vaping-the activity of using electronic cigarettes.

Ventilation battery cover-see ventilation holes.

Ventilation holes-small holes on the battery unit to prevent the battery from overheating and thermal runaway.

Vapor-the result of atomizing e-liquid, also called "cloud". This is the main factor of vaping. It simulates smoke and provides smokers with a safer alternative than traditional cigarettes.

Vaporizer-another term for electronic cigarettes. Usually used to describe e-cigarette devices used for grinding materials or oil concentrates.

Vapor production-a term used to describe the amount of vapor produced by an e-cigarette or e-liquid.

Vegetable glycerin or glycerin (VG)-one of the two basic ingredients used in the production of e-liquid. Vegetable glycerin generally produces more steam than propylene glycol (PG). Users who are allergic to PG often use 90% or 100% VG solution.

Voltage-Refers to the electrical potential of the power source.

Voltage drop-This refers to the power drop typically experienced by mechanical users. The output of the new battery is 4.2v. As the voltage drops, the power and steam generation of the e-cigarette will also decrease.

VV or variable voltage-any type of e-cigarette or PV allows users to adjust its voltage output according to taste, and it is considered superior to conventional PV with static voltage output.

VW or variable power-variable power devices allow users to adjust the power output of their photovoltaics. PV adjusts power according to the set wattage, which is the main difference between VW and VV.

Watt (wattage)-the amount of electricity consumed by the atomizer coil. The higher the wattage-the more steam produced. Higher wattage usually results in a decrease in taste and hot steam.

Wick-a material wrapped around the heating coil that can be soaked in e-liquid to further evaporate. Usually made of organic cotton.

The wick-usually made of silica, other materials used for the wick include stainless steel mesh, organic cotton, and ceramics. The main purpose of the wick is to hold the e-cigarette liquid in a controlled manner and deliver it to the heating element of the e-cigarette to prevent overflow.

Wire-This is a term referring to the material used in the coil of the atomizer.

Winding-This refers to the number of turns used in the winding of the coil. The more the coil is wound, the higher the resistance.

I love words, and in my career as a journalist, I strive to provide facts about everything I write. There are too many false and alarmist stories about life and e-cigarettes. My mission is to make people less scary of e-cigarettes through rich articles and extensive research, not only studying the possible harms of cigarettes and tobacco, but also studying the objective aspects of e-cigarettes.

Comments on "Vape: Meanings and Definitions of Vaping Terms and Slang"

I am new to e-cigarettes, this is very useful

© Vaping Daily, all rights reserved, 2021.

Receive scoops in your mail

Copy and paste this code into the domain